J23-80 Series C-frame Inclinable Press

Parameter		UNIT	J23-6.3	J23-10	J23-16	J23-25	J23-35	J23-40	J23-63	JB23-63	J23-80	J23-100	J23-125
Nominal Capacity		KN	63	100	160	250	350	400	630	630	800	1000	1250
Nominal Stroke		mm	2	2	2	2.5	3.5	6	6	7	7	7	8
Slide Stroke		mm	35	45	55	65	80	90	110	110	120	140	150
Slide Stroke Per Minute		T/M	170	145	125	55	50	45	50	40	38	38	38
Maximum Die Set Height		mm	150	180	220	270	290	320	360	390	440	480	500
Die Height Adjustment		mm	30	35	45	55	60	65	80	80	90	100	100
Throat Depth		mm	110	130	160	200	220	250	260	310	350	380	390
Distance Between Uprights		mm	150	180	220	270	280	340	350	420	450	560	550
Slide Bottom Size	LxR	mm	140	170	200	250	250	300	300	400	430	540	540
Slide Bottom Size	FxB	mm	120	150	180	220	220	260	260	360	360	480	480
Steam hole Size	Dia	mm	30	30	40	40	40	50	50	50	60	60	60
Steam hole Size	Depth	mm	55	55	60	60	60	70	70	70	75	75	75
Bolster Size	LxR	mm	310	370	450	560	610	700	760	860	950	1080	1100
Bolster Size	FxB	mm	200	240	300	370	400	460	480	570	650	710	720
Diameter of Blanking Hole		mm	60	80	100	120	130	150	180	180	200	220	240
Bolster Thickness		mm	30	35	40	50	60	65	80	80	100	120	130
Max.Angle of Inclination			45	35	35	30	30	30	20	20	20	15	13
Bolster Surface Height		mm	750	730	750	800	815	850	810	850	850	850	860
Overall Size	FxB	mm	780	900	1150	1345	1460	1721	1810	1958	2060	2404	2504
	LxR	mm	620	665	847	950	1058	1335	1350	1500	1715	1790	1790
	H	mm	1503	1658	1910	2130	2225	2488	2740	2868	3290	3625	3715
Distance between foundation bolts	FxB	mm	530	610	780	920	1020	1060	1180	1300	1360	1550	1710
Distance between foundation bolts	LxR	mm	314	394	450	600	650	750	850	920	1010	1130	1110
Motor Power		Kw	0.75	1.1	1.5	2.2	4	5.5	5.5	7.5	7.5	11	11
Weight		Kg	400	576	1085	1780	2650	3540	4550	5500	7390	10800	12035

	Adopt rotating key positive clutch, which is easy to operate and convenient to maintain.
	J23-25T adopts rolling bearing instead of sliding bearing(copper bearing) and this makes the transmission gear more wear-resistant and avoids loud noise of gears caused by copper bearing abrasion.
	J23-35T machine body is much heavier than others with the rolling bearing transmission(lowernoise), which almost equal to the light J23-40T presses.
	J23-80T and above press machines adopt pneumatic double balance cylinder, which decreased the balance force fluctuate, and balanced the weight of slider and die, prevent the unstable situation. Besides, it also avoids the clash and noise caused by the gear reverse force during transmission; eliminate the clearance between connecting and slide; reduce the ompavt force and abrasion of stress components; and avoid the accident caused by falling slider when brake or connecting rod broke.

Power Press